| |
|
|
The 3 way water saver in action
Available from the EcoCentre for $8.00
|
|
|
|
Instructions
|
|
|
- Remove inspection plug from waste pipe.
- Roll up cone end of Water Saver, wet with water and insert into inspection plug opening until lug touches pipe.
- Attach your hose fittings and hoses to the outlets and have a well watered garden. 12mm hose will fit inside the outlets and 19mm hose will fit around the outside of the outlets.
- Use 15mm dowel or suitable alternative to block any unused outlets.
|
|
|
Ideal for connection to drip watering systems. Fits 19mm poly tube.
DO NOT USE WITH WASTE WATER FROM KITCHEN SINK AND TOILET
To ensure problem free use of your Water Saver,
check the following points.
|
- Make sure you install the Water Saver as per instructions.
- The 3 outlets on this Water Saver have been designed to eliminate overflow problems associated with some other devices.
- Keep the inspection opening cap in a safe place so that it can be refitted when the Water Saver is removed.
- Make sure that the hoses connected to the Water Saver have enough fall to enable effective drainage.
|
|
- Ensure that the waste water you are diverting does not flow or seep outside your own propetty.
- The Water Saver is only for use on waste pipes from household baths, basins, showers, laundry troughs and washing machines. Use with other fixtures is prohibited.
- Use of the Water Saver is at the responsibility of the user.
|
|
 |
|
|
|
|
| Home
| 3 Way Water Saver 